Hyundai Bi3 Owner'S Manual Download

Page: 439 / 444

10-100

Maintenance

Operating precautions for catalytic

converters (if equipped)

WARNING

Fire
• A hot exhaust system can ignite

flammable items under your vehicle.

Do not park, idle, or drive the vehicle

over or near flammable objects, such

as grass, vegetation, paper, leaves,

etc.

• The exhaust system and catalytic

system are very hot while the engine

is running or immediately after the

engine is turned off. Keep away from

the exhaust system and catalytic, you

may get burned. Also, do not remove

the heat sink around the exhaust

system, do not seal the bottom of the

vehicle or do not coat the vehicle for

corrosion control. It may present a

fire risk under certain conditions.

Your vehicle is equipped with a catalytic

converter emission control device.
Therefore, the following precautions

must be observed:
• Use only UNLEADED FUEL for petrol

engine.

• Do not operate the vehicle when

there are signs of engine malfunction,

such as misfire or a noticeable loss of

performance.

• Do not misuse or abuse the engine.

Examples of misuse are coasting with

the ignition off and descending steep

grades in gear with the ignition off.

• Do not operate the engine at high idle

speed for extended periods (5 minutes

or more).

• Do not modify or tamper with any

part of the engine or emission

control system. All inspections and

adjustments must be made by an

authorized HYUNDAI dealer.

• Avoid driving with a extremely low fuel

level. Running out of fuel could cause

the engine to misfire, damaging the

catalytic converter.

Failure to observe these precautions

could result in damage to the catalytic

converter and to your vehicle.

Additionally, such actions could void

your warranties.

Summary of Contents for Bi3





























































































































































































































































































































































































































































Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands

Hyundai Bi3, Owner'S Manual

Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands