Hyundai Bi3 Owner'S Manual Download Page 369

Page: 369 / 444

10-30

Maintenance

OBI3090007

If it is near or at L, add enough oil to

bring the level to F. Do not overfill.

Use only the specified engine oil.
• If exceeding the maintenance

schedule for replacement of engine

oil, the engine oil performance

may deteriorate and the engine

condition may be affected. Therefore,

the replacement cycle should be

observed.

• If not using the recommended oil,

replace it according to the severe

usage maintenance conditions.

(Refer to “Recommended lubricants

and capacities” in chapter 2.)

WARNING

Radiator hose
Be very careful not to touch the

radiator hose when checking or adding

engine oil as it may be hot enough to

burn you.

CAUTION

• Do not spill engine oil, when adding

or changing engine oil. If you drop

the engine oil on the engine room,

wipe it off immediately.

• When you wipe the oil level gauge,

you should wipe it with a clean cloth.

When mixed with debris, it can cause

engine damage.

Summary of Contents for Bi3





























































































































































































































































































































































































































































Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands

Hyundai Bi3, Owner'S Manual

Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands