Hyundai Bi3 Owner'S Manual Download Page 217

Page: 217 / 444

6-89

VOLUME (VOL + / VOL -) (1)

• Move the VOLUME toggle switch up to

increase volume.

• Move the VOLUME toggle switch

down to decrease volume.

SEEK/PRESET ( / ) (2)

If the SEEK/PRESET toggle switch is

moved up or down and held for 0.8

second or more, it will function in the

following modes.

RADIO mode

It will function as the AUTO SEEK select

switch. It will SEEK until you release the

switch.

MEDIA mode

It will function as the FF/REW switch

(except in Bluetooth audio mode).
If the SEEK/PRESET toggle switch is

moved up or down, it will function in the

following modes.

RADIO mode

It will function as the PRESET STATION

UP/DOWN switch.

MEDIA mode

It will function as the TRACK UP/ DOWN

switch.

MODE (

) (3)

Press the MODE button to select RADIO/

MEDIA/Bluetooth Audio, etc.

MUTE (

) (4, if equipped)

• Press the button to mute the sound.
• Press the button again to activate the

sound.

• During a call, press to turn off the

microphone.

Information

Detailed information for audio control
buttons are described in the following
pages in this chapter.

Infotainment system (if equipped)

If your vehicle is equipped with

additional navigation, please refer to the

infotainment system manual separately

supplied.

Summary of Contents for Bi3





























































































































































































































































































































































































































































Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands

Hyundai Bi3, Owner'S Manual

Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands