Hyundai Bi3 Owner'S Manual Download Page 335

Page: 335 / 444

9-21

Towing service

OBC3080014

Dolly

If emergency towing is necessary,

we recommend having it done by

an authorized HYUNDAI dealer or a

commercial tow-truck service. Proper

lifting and towing procedures are

necessary to prevent damage to the

vehicle. The use of wheel dollies or

flatbed is recommended.
It is acceptable to tow the vehicle with

the rear wheels on the ground (without

dollies) and the front wheels off the

ground. If any of the loaded wheels or

suspension components are damaged or

the vehicle is being towed with the front

wheels on the ground, use a towing dolly

under the front wheels.
When being towed by a commercial tow

truck and wheel dollies are not used, the

front of the vehicle should always be

lifted, not the rear.

NOTICE

• Do not tow the vehicle with 4 wheels

on the ground (such as dinghy towing

behind a motorhome or other motor

vehicle) as this can seriously damage

the Transmission.

OBI3080001

• Do not tow the vehicle with the front

wheels on the ground as this may

cause damage to the vehicle and the

Transmissions.

OBC3080016

• Do not tow with sling-type

equipment. Use a wheel lift or flatbed

equipment.

OBC3080015

TOWING

Summary of Contents for Bi3





























































































































































































































































































































































































































































Search results

Summary of Contents for Bi3

Reviews:

Brands by name

Popular brands

Hyundai Bi3, Owner'S Manual

Search results

Summary of Contents for Bi3

Reviews:

Brands by name

Popular brands