Hyundai Bi3 Owner'S Manual Download Page 99

Page: 99 / 444

5-9

Warning and indicator lights

Information

Make sure that all warning lights are
OFF after starting the engine. If any light
is still ON, this indicates a situation that
needs attention.

Air bag Warning Light

This warning light illuminates:

• Once you set the ignition switch or

Engine Start/Stop button to the ON

position.

- It illuminates for approximately 6

seconds and then goes off.

• When there is a malfunction with the

SRS.

In this case, we recommend that you

have the vehicle inspected by an

authorized HYUNDAI dealer.

Seat Belt Warning Light

This warning light informs the driver (or

front passenger) that the seat belt is not

fastened.
For more details, refer to the “Seat

Belts” in chapter 3.

Parking Brake & Brake

Fluid Warning Light

This warning light illuminates:

• Once you set the ignition switch or

Engine Start/Stop button to the ON

position.

- It illuminates for approximately 3

seconds

- It remains on if the parking brake is

applied.

• When the parking brake is applied.
• When the brake fluid level in the

reservoir is low.

- If the warning light illuminates

with the parking brake released, it

indicates the brake fluid level is low.

Summary of Contents for Bi3





























































































































































































































































































































































































































































Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands

Hyundai Bi3, Owner'S Manual

Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands