Hyundai Bi3 Owner'S Manual Download Page 328

Page: 328 / 444

9-14

Emergency situations

WARNING

Changing a tire can be dangerous.

Follow the instructions in this section

when changing a tire to reduce the risk

of serious injury or death.

Jack and tools

OBI3080003

Jack
Jack handle
Wheel lug nut wrench
Towing hook

The jack, jack handle, and wheel lug nut

wrench, towing hook are stored in the

luggage compartment.
The jack is provided for emergency tire

changing only.

Removing and storing the spare

tire

OAI3079005

Turn the winged hold down bolt

counterclockwise to remove the spare

tire.
Store the spare tire in the same

compartment by turning the winged

hold down bolt clockwise.
To prevent the spare tire and tools from

“rattling” store them in their proper

location.

OAI3079006

If it is hard to loosen the tire hold-down

wing bolt by hand, you can loosen it

easily using the wheel lug nut wrench.
1. Put the wrench (1) inside of the tire

hold-down wing bolt.

2. Turn the tire hold-down wing bolt

counterclockwise with the wrench.

IF YOU HAVE A FLAT TIRE

Summary of Contents for Bi3





























































































































































































































































































































































































































































Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands

Hyundai Bi3, Owner'S Manual

Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands