manualshive.com logo in svg

Hyundai Bi3, Owner'S Manual

Share
Download
Hyundai Bi3 Owner'S Manual Download Page 74

4-41

04

 WARNING

•  NEVER use a rearward facing child 

restraint on a seat protected by an 

ACTIVE AIR BAG in front of it, DEATH 

or SERIOUS INJURY to the CHILD can 

occur.

•  Never put a child restraint in the 

front passenger’s seat. If the front 

passenger air bag inflates, it would 

cause serious or fatal injuries.

Air bag warning and indicator

Air bag warning light

:ǘ

:ǘ

The purpose of the air bag warning light 

in your instrument panel is to alert you 

of a potential problem with your air bag 

- Supplemental Restraint System (SRS).
When the ignition switch is turned ON, 

the warning light should illuminate for 

approximately 6 seconds, then go off.
Have the system checked if:
•  The light does not turn on briefly when 

you turn the ignition ON.

•  The light stays on after illuminating for 

approximately 6 seconds. 

•  The light comes on while the vehicle is 

in motion. 

•  The light blinks when the ignition 

switch is in ON position.

Summary of Contents for Bi3





























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands