Hyundai Bi3 Owner'S Manual Download Page 420

Page: 420 / 444

10-81

Type B

OBI3090024

(1) Headlight(Low/High)
(2) Static Bending Light
(3) Daytime running light & Position light
(4) Turn signal light
(5) Front fog light

Headlight, Position light, Daytime
running light replacement

If not LED lamp does not operate,

we recommend that the system be

inspected by an authorized HYUNDAI

dealer. The LED lamps cannot be

replace as a single unit because it is an

integrated unit. The LED lamp has to be

replaced with the unit.
A skilled technician should check or

repair the LED lamp, for it may damage

related parts of the vehicle.

Low beam assist static light

1. Turn the front wheel at inwards.

OAC3089042TU

OAC3089043TU

OBC3090055

2. Remove retainers available on under

cover bottom area in the respective

side of headlight for bulb A/S.

3. Remove Wheel guard clips (B),

bumper cover bolt (A) and bumper

upper cover blot (C1) & retainer (C2).

Summary of Contents for Bi3





























































































































































































































































































































































































































































Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands

Hyundai Bi3, Owner'S Manual

Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands