Hyundai Bi3 Owner'S Manual Download Page 338

Page: 338 / 444

9-24

Emergency situations

OBC3080021

• Use a towing cable or chain less than 5

m (16 feet) long. Attach a white or red

cloth (about 30 cm (12 inches) wide)

in the middle of the cable or chain for

easy visibility.

• Drive carefully so the towing cable or

chain remains tight during towing.

• Before towing, check the Automated

manual transmission for fluid leaks

under your vehicle. If the Automated

manual transmission fluid is leaking,

flatbed equipment or a towing dolly

must be used.

NOTICE

Accelerate or decelerate the vehicle

in a slow and gradual manner while

maintaining tension on the tow rope

or chain to start or drive the vehicle,

otherwise tow hooks and the vehicle

may be damaged.

NOTICE

To avoid damage to your vehicle and

vehicle components when towing:
• Always pull straight ahead when

using the towing hooks. Do not pull

from the side or at a vertical angle.

• Do not use the towing hooks to pull

a vehicle out of mud, sand or other

conditions from which the vehicle

cannot be driven out under its own

power.

• The vehicle should be towed at a

speed of 25 km/h (15 mph) or less

within the distance of 20 km (12

miles). (for Manual transmission/

Automated manual transmission

vehicle)

• The vehicle should be towed at a

speed of 15 km/h (10 mph) or less

within the distance of 1.5 km (1

mile). (for Dual clutch transmission/

Intelligent variable transmission

vehicle)

Summary of Contents for Bi3





























































































































































































































































































































































































































































Search results

Summary of Contents for Bi3

Reviews:

Brands by name

Popular brands

Hyundai Bi3, Owner'S Manual

Search results

Summary of Contents for Bi3

Reviews:

Brands by name

Popular brands