Hyundai Bi3 Owner'S Manual Download Page 165

Page: 165 / 444

6-37

WARNING

The tailgate swings upward. Make

sure no objects or people are near the

rear of the vehicle when opening the

tailgate.

NOTICE

Make certain that you close the tailgate

before driving your vehicle. Possible

damage may occur to the tailgate lift

cylinders and attaching hardware if the

tailgate is not closed prior to driving.

Closing the tailgate

To close the tailgate, lower and push

down the tailgate firmly. Make sure that

the tailgate is securely latched.

WARNING

Always keep the tailgate lid completely

closed while the vehicle is in motion. If

it is left open or ajar, poisonous exhaust

gases containing carbon monoxide

(CO) may enter the vehicle and serious

illness or death may result.

WARNING

Rear cargo area
Occupants should never ride in the

rear cargo area where no restraints are

available. To avoid injury in the event of

an accident or sudden stops, occupants

should always be properly restrained.

WARNING

OBI3050015

Do not hold the part (gas lifter) that

supports the tailgate. Be aware that

the deformation of the part may cause

vehicle damage and a risk of safety

accident.

Summary of Contents for Bi3





























































































































































































































































































































































































































































Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands

Hyundai Bi3, Owner'S Manual

Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands