Hyundai Bi3 Owner'S Manual Download Page 323

Page: 323 / 444

9-9

OBI3080002

OSU2I049052

(1) Low tire pressure telltale /

TPMS malfunction indicator

(2) Low tire pressure position telltale and

tire pressure telltale (Shown on the

LCD display)

Check tire pressure

OSU2I049054

• You can check the tire pressure in the

Assist mode on the cluster.

Refer to the “User settings mode” in

chapter 4.

• Tire pressure is displayed 1~2 minutes

later after driving.

• If tire pressure is not displayed when

the vehicle is stopped, “Drive to

display” message will appear. After

driving, check the tire pressure.

• The displayed tire pressure values may

differ from those measured with a tire

pressure gauge.

• You can change the tire pressure

unit in the User Settings mode on the

instrument cluster.

- psi, kpa, bar (Refer to the “User

settings mode” in chapter 4).

7,5(35(6685(021,725,1*6<67(0ǣ7306Ǥǣ,)(48,33('Ǥ

Summary of Contents for Bi3





























































































































































































































































































































































































































































Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands

Hyundai Bi3, Owner'S Manual

Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands