Hyundai Bi3 Owner'S Manual Download Page 270

Page: 270 / 444

7-23

NOTICE

•

Always come to a complete stop

before shifting into D (Drive) or R

(Reverse).

• Do not put the shift lever in N

(Neutral) while driving.

WARNING

If the transmission cannot shift into

Drive or Reverse, the position indicator

D or R) on the cluster will blink. We

recommend that you contact an

authorized Hyundai dealer to have the

system checked.

DCT warning messages

This warning message is displayed when

vehicle is driven slowly on a grade and

the vehicle detects that the brake pedal

is not applied.

OAC3069033TU

Steep grade

Driving up hills or on steep grades:
• To hold the vehicle on an incline use

the foot brake or the parking brake.

• When in stop-and-go traffic on an

incline, allow a gap to form ahead

of you before moving the vehicle

forward. Then hold the vehicle on the

incline with the foot brake.

• If the vehicle is held on a hill by

applying the accelerator pedal

or by creeping with the brake

pedal disengaged, the clutch and

transmission may overheat which

can result in damage. At this time, a

warning message will appear on the

LCD display.

• If the LCD warning is active, the foot

brake must be applied.

• Ignoring the warnings can lead to

damage to the transmission.

Summary of Contents for Bi3





























































































































































































































































































































































































































































Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands

Hyundai Bi3, Owner'S Manual

Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands