Hyundai Bi3 Owner'S Manual Download Page 304

Page: 304 / 444

Driver assistance system

8-2

OTM070111

(1) Cruise indicator
(2) Set speed
Cruise Control will allow you to drive at

speeds above 30 km/h (20 mph) without

depressing the accelerator pedal.

System operation

To set speed

1. Accelerate to the desired speed, which

must be more than 30 km/h (20 mph).

OBI3070001

2. Press the Driving Assist (

)

button at the desired speed. The set

speed and Cruise (

) indicator

will illuminate on the cluster.

3. Release the accelerator pedal.
Vehicle speed will maintain the set

speed even when the accelerator

pedal is not depressed.

Information

On a steep slope, the vehicle may slightly
slow down or speed up while driving
uphill or downhill.

&58,6(&21752/ǣ&&Ǥǣ,)(48,33('Ǥ

Summary of Contents for Bi3





























































































































































































































































































































































































































































Search results

Summary of Contents for Bi3

Reviews:

Brands by name

Popular brands

Hyundai Bi3, Owner'S Manual

Search results

Summary of Contents for Bi3

Reviews:

Brands by name

Popular brands