Hyundai Bi3 Owner'S Manual Download Page 305

Page: 305 / 444

8-3

To increase speed

OBI3070002

• Push the + switch up and release it

immediately. The cruising speed will

increase by 1 km/h (1 mph) each time

the switch is operated in this manner.

• Push the + switch up and hold it

while monitoring the set speed on

the cluster. The cruising speed will

increase to the nearest multiple of ten

(multiple of five in mph) at first, and

then increase by 10 km/h (5 mph) each

time the switch is operated in this

manner.

Release the switch when the desired

speed is shown and the vehicle will

accelerate to that speed.

To decrease speed

OBI3070003

• Push the - switch down and release it

immediately. The cruising speed will

decrease by 1 km/h (1 mph) each time

the switch is operated in this manner.

• Push the - switch down and hold it

while monitoring the set speed on

the cluster. The cruising speed will

decrease to the nearest multiple of

ten (multiple of five in mph) at first,

and then decrease by 10 km/h (5 mph)

each time the switch is operated in

this manner.

Release the switch at the speed you

want to maintain.

Summary of Contents for Bi3





























































































































































































































































































































































































































































Search results

Summary of Contents for Bi3

Reviews:

Brands by name

Popular brands

Hyundai Bi3, Owner'S Manual

Search results

Summary of Contents for Bi3

Reviews:

Brands by name

Popular brands