Hyundai Bi3 Owner'S Manual Download

Page: 204 / 444

6-76

Convenient features

Rear window defroster

OBC3050122TU

Manual climate control system

Automatic climate control system

OBI3050110

The defroster heats the window to

remove frost, fog and thin ice from the

interior and exterior of the rear window,

while engine is running.
• To activate the rear window defroster,

press the rear window defroster

button located in the center facia

switch panel. The indicator on the rear

window defroster button illuminates

when the defroster is ON.

• To turn off the defroster, press the rear

window defroster button again.

Information

• If there is heavy accumulation of snow

on the rear window, brush it off before
operating the rear defroster.

• The rear window defroster

automatically turns off after
approximately 20 minutes or when the
ignition switch is in the LOCK/OFF
position.

Summary of Contents for Bi3





























































































































































































































































































































































































































































Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands

Hyundai Bi3, Owner'S Manual

Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands