Hyundai Bi3 Owner'S Manual Download Page 306

Page: 306 / 444

Driver assistance system

8-4

To temporarily pause the system

OBI3070004

Cruise Control will be paused when:
• Depressing the brake pedal.
• Pushing the

button.

• Shifting the gear to N (Neutral).
• Decreasing vehicle speed to less than

approximately 30 km/h (20 mph).

• ESC (Electronic Stability Control) is

operating.

• Downshifting to 2nd gear when in

Manual Shift mode.

The set speed will turn off but the Cruise

(

) indicator will stay on.

To resume the system

OBI3070005

Push the +, - switch or

button.

If you push the + switch up or - switch

down, vehicle speed will be set to the

current speed on the cluster.
If you push the

button, vehicle

speed will resume to the preset speed.
Vehicle speed must be above 30 km/h

(20 mph) for the system to resume.

Summary of Contents for Bi3





























































































































































































































































































































































































































































Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands

Hyundai Bi3, Owner'S Manual

Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands