manualshive.com logo in svg

Hyundai Bi3, Owner'S Manual

Share
Download
Hyundai Bi3 Owner'S Manual Download Page 75

4-42

Safety system

SRS components and functions

OBI3030006

OBI3030006

The SRS consists of the following 

components:
(1) Driver’s front air bag module
(2) Passenger’s front air bag module
(3) Pre-tensioner seatbelt system*
(4) Air bag warning light
(5) SRS control module (SRSCM)
(6) Front impact Sensor
(7) Side air bag modules*
(8) Curtain air bag modules *
(9) Side impact sensors *

* : if equipped

The SRSCM continuously monitors all 

SRS components while the ignition 

switch is ON to determine if a crash 

impact is severe enough to require air 

bag deployment or pre-tensioner seat 

belt deployment.

The SRS air bag warning light on the 

instrument panel will illuminate for 

about 6 seconds after the ignition switch 

is turned to the ON position, after which 

the air bag warning light should go out.

 WARNING

If any of the following conditions 

occurs, this indicates a malfunction 

of the SRS. We recommend that the 

system be inspected by an authorized 

HYUNDAI dealer.
•  The light does not turn on briefly 

when you turn the ignition ON.

•  The light stays on after illuminating 

for approximately 6 seconds.

•  The light comes on while the vehicle 

is in motion.

•  The light blinks when the ignition 

switch is in ON position.

Summary of Contents for Bi3





























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands