Hyundai Bi3 Owner'S Manual Download

Page: 373 / 444

10-34

Maintenance

Recommended engine coolant

• Use only soft (distilled) water in the

coolant mixture.

• The engine in your vehicle has

aluminum engine parts and must be

protected by an ethylene-glycol-based

coolant to prevent corrosion and

freezing.

• DO NOT USE alcohol or methanol

coolant or mix them with the specified

coolant.

• Do not use a solution that contains

more than 60% antifreeze or less than

35% antifreeze, which would reduce

the effectiveness of the solution.

For mixture percentage, refer to the

following table.

Ambient

Temperature

Mixture Percentage

(volume)

Antifreeze

Water

-15°C (5°F)

-25°C (-13°F)

-35°C (-31°F)

-45°C (-49°F)

WARNING

Radiator cap
Do not remove the radiator

cap when the engine and

radiator are hot. Scalding

hot coolant and steam

may blow out under pressure causing

serious injury.

Changing the coolant

We recommend that the coolant be

replaced by an authorized HYUNDAI

dealer.

NOTICE

Put a thick cloth or fabric around the

radiator cap before refilling the coolant

in order to prevent the coolant from

overflowing into engine parts such as

the alternator.

WARNING

Coolant
• Do not use radiator coolant or

antifreeze in the washer fluid

reservoir.

• Radiator coolant can severely

obscure visibility when sprayed on

the windshield and may cause loss

of vehicle control or damage to paint

and body trim.

Summary of Contents for Bi3





























































































































































































































































































































































































































































Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands

Hyundai Bi3, Owner'S Manual

Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands