Hyundai Bi3 Owner'S Manual Download

Page: 8 / 444

1-4

Introduction

DANGER

DANGER indicates a hazardous

situation which, if not avoided, will

result in death or serious injury.

WARNING

WARNING indicates a hazardous

situation which, if not avoided, could

result in death or serious injury.

CAUTION

CAUTION indicates a hazardous

situation which, if not avoided, could

result in minor or moderate injury.

NOTICE

NOTICE indicates a situation which,

if not avoided, could result in vehicle

damage.

FUEL REQUIREMENTS

Petrol engine

Unleaded

Your new vehicle is designed to use only

unleaded fuel having an Octane Rating

of RON (Research Octane Number) 91 /

AKI (Anti-Knock Index) 87 or higher. (Do

not use methanol blended fuels)

Your new vehicle is designed to obtain

maximum performance with UNLEADED

FUEL, as well as minimize exhaust

emissions and spark plug fouling.

CAUTION

NEVER USE LEADED FUEL. The use

of leaded fuel is detrimental to the

catalytic converter and will damage the

engine control system’s oxygen sensor

and affect emission control.
Never add any fuel system cleaning

agents to the fuel tank other than what

has been specified (We recommend

that you consult an authorized

HYUNDAI dealer for details.)

WARNING

• Do not “top off” after the nozzle

automatically shuts off when

refueling.

• Always check that the fuel cap is

installed securely to prevent fuel

spillage in the event of an accident.

Summary of Contents for Bi3





























































































































































































































































































































































































































































Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands

Hyundai Bi3, Owner'S Manual

Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands