Hyundai Bi3 Owner'S Manual Download

Page: 272 / 444

7-25

• If this occurs, pull over to a safe

location, stop the vehicle with the

engine running, apply the brakes

and shift the vehicle to P (Park) with

engine on, and allow the transmission

to cool.

• When the message “Trans cooled.

Resume driving.” appears you can

continue to drive your vehicle.

• When possible, drive the vehicle

smoothly.

If any of the warning messages in the

LCD display continue to blink, for your

safety, we recommend you contact an

authorized HYUNDAI dealer and have

the system checked.

Transmission ranges

The indicator in the instrument cluster

displays the shift lever position when the

ignition switch is in the ON position.

P (Park)

Always come to a complete stop before

shifting into P (Park).
To shift from P (Park), you must depress

firmly on the brake pedal and make sure

your foot is off the accelerator pedal.
If you have done all of the above and

still cannot shift the lever out of P

(Park), see “Shift-Lock Release” in this

chapter.
The shift lever must be in P (Park) before

turning the engine off.

WARNING

• Shifting into P (Park) while the

vehicle is in motion may cause you to

lose control of the vehicle.

• After the vehicle has stopped, always

make sure the shift lever is in P (Park),

apply the parking brake, and turn the

engine off.

• When parking on an incline, block the

wheels to prevent the vehicle from

rolling down.

• For safety, always engage the parking

brake with the shift lever in the P

(Park) position except for the case of

emergency parking.

Summary of Contents for Bi3





























































































































































































































































































































































































































































Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands

Hyundai Bi3, Owner'S Manual

Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands