Hyundai Bi3 Owner'S Manual Download

Page: 101 / 444

5-11

Electric Power Steering

(EPS) Warning Light

This warning light illuminates:

• Once you set the ignition switch or

Engine Start/Stop button to the ON

position.

- It illuminates for approximately 3

seconds and then goes off.

• When there is a malfunction with the

EPS.

In this case, we recommend that you

have the vehicle inspected by an

authorized HYUNDAI dealer.

Malfunction Indicator

Lamp (MIL)

This warning light illuminates:

• Once you set the ignition switch or

Engine Start/Stop button to the ON

position.

- It illuminates for approximately 3

seconds and then goes off.

• When there is a malfunction with the

emission control system.

In this case, we recommend that you

have the vehicle inspected by an

authorized HYUNDAI dealer.

NOTICE

- Malfunction Indicator Lamp (MIL)
Driving with the Malfunction Indicator

Lamp (MIL) on may cause damage to

the emission control systems which

could effect drivability and/or fuel

economy.

NOTICE

- Petrol Engine
If the Malfunction Indicator Lamp

(MIL) illuminates, potential catalytic

converter damage is possible which

could result in loss of engine power.
In this case, we recommend that you

have the vehicle inspected by an

authorized HYUNDAI dealer as soon as

possible.

NOTICE

- Diesel Engine
If the Malfunction Indicator Lamp

(MIL) blinks, some error related to the

injection quantity adjustment occurs

which could result in loss of engine

power, combustion noise and poor

emission.
In this case, we recommend that

you have the engine control system

inspected by an authorized HYUNDAI

dealer.

Summary of Contents for Bi3





























































































































































































































































































































































































































































Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands

Hyundai Bi3, Owner'S Manual

Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands