E&G Classics 1409-0102-10, Инструкция по установке

Страница: 1 / 3

Chrome Plated S. S. Fine Mesh Insert
(8) 8-32 ESNA Half Nuts
Top Mounting Plate
Lower Mesh Retainer w/Pins
Remove the factory upper grille from the bumper cover
by removing the threaded push pins across the top of the
grille and the phillips screws located at the sides and
bottom of the grille . A short phillips screwdriver or
ratcheting screw driver works best (grille shown removed
to show screw locations).
. Apply masking tape around the lower grille opening.
1409-0034-10
1409-0020-10
1999-0065-00
1409-0210-10
1409-0042-10
1221-0158-09
1999-0065-00
1999-0264-00
1999-0311-00
3999-9035-00
1409-0039-10
1409-0158-10
IMPORTANT!
The exposed edges of the stainless steel
grille and mesh can be extremely sharp.
Please handle with care.
. Cut out and align the supplied , making sure the
lines on the match the openings in the bumper
cover. Once properly aligned, tape the into place
and use an awl or similar pointed to the mark the hole
locations onto the bumper cover, then remove the
.
3
4
“BLACK ICE” S. S. Fine Mesh Insert
(8) #8-32 ESNA Half Nuts
Top Mounting Plate
Lower Mesh Retainer w/Pins
1409-0034-10
1999-0065-00
1409-0210-10
1409-0042-10
1221-0158-09
1999-0065-00
1999-0264-00
1999-0311-00
3999-9035-00
1409-0039-10
1409-0158-10
1
A
A
B B