Hyundai Bi3 Owner'S Manual Download Page 346

Page: 346 / 444

10-7

WARNING

Do not leave gloves, rags or any other

combustible material in the engine

compartment. Doing so may cause a

heat-induced fire.

NOTICE

• Do not put heavy objects or apply

excessive force on top of the engine

cover (if equipped) or fuel related

parts.

• When you inspect the fuel system

(fuel lines and fuel injection devices),

we recommend that you contact an

authorized HYUNDAI dealer.

• Do not drive long time with the

engine cover (if equipped) removed.

• When checking the engine room, do

not go near fire. Fuel, washer fluid,

etc. are flammable oils that may

cause fire.

• Before touching the battery, ignition

cables and electrical wiring, you

should disconnect the battery “-”

terminal. You may get an electric

shock from the electric current.

• When you remove the interior trim

cover with a flat head (-) driver, be

careful not to damage the cover.

• Be careful when you replace and

clean bulbs to avoid burns or

electrical shock.

Summary of Contents for Bi3





























































































































































































































































































































































































































































Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands

Hyundai Bi3, Owner'S Manual

Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands