Hyundai Bi3 Owner'S Manual Download

Page: 327 / 444

9-13

NOTICE

If original mounted tire is replaced

with the spare tire, the TPMS sensor

on the replaced spare wheel should be

initiated and we recommend that the

TPMS sensor on the original mounted

wheel be deactivated by a HYUNDAI

dealer. If the TPMS sensor on the

original mounted wheel located in the

spare tire carrier still activates, the

tire pressure monitoring system may

not operate properly. We recommend

that the system be serviced by an

authorized HYUNDAI dealer.

You may not be able to identify a low

tire by simply looking at it. Always use

a good quality tire pressure gauge to

measure the tire’s inflation pressure.

Please note that a tire that is hot (from

being driven) will have a higher pressure

measurement than a tire that is cold.
A cold tire means the vehicle is in parked

position for at least 3 hours or driven

less than 1.6 km (1 mile) in that period.
Allow the tire to cool before measuring

the inflation pressure. Always be sure

the tire is cold before inflating to the

recommended pressure.

NOTICE

We recommend that you use the tire

sealant approved by HYUNDAI if your

vehicle is equipped with a Tire Pressure

Monitoring System. The liquid sealant

can damage the tire pressure sensors.

WARNING

TPMS
• The TPMS cannot alert you to severe

and sudden tire damage caused by

external factors such as nails or road

debris.

• If you feel any vehicle instability,

immediately take your foot off

the accelerator, apply the brakes

gradually and with light force, and

slowly move to a safe position off the

road.

WARNING

Protecting TPMS
Tampering with, modifying, or disabling

the Tire Pressure Monitoring System

(TPMS) components may interfere with

the system’s ability to warn the driver

of low tire pressure conditions and/

or TPMS malfunctions. Tamper-ing

with, modifying, or disabling the Tire

Pressure Monitoring System (TPMS)

components may void the war-ranty for

that portion of the vehicle.

Summary of Contents for Bi3





























































































































































































































































































































































































































































Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands

Hyundai Bi3, Owner'S Manual

Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands