Hyundai Bi3, Owner'S Manual

Page: 49 / 444

4-16
Safety system
WARNING
• No modifications or additions
should be made by the user which
will either prevent the seat belt
adjusting devices from operating to
remove slack, or prevent the seat
belt assembly from being adjusted to
remove slack.
• When you fasten the seat belt, be
careful not to latch the seat belt
in buckles of other seat. It’s very
dangerous and you may not be
protected by the seat belt properly.
• Do not unfasten the seat belt and
do not fasten and unfasten the seat
belt repeatedly while driving. This
could result in loss of control, and
an accident causing death, serious
injury, or property damage.
• When fastening the seat belt, make
sure that the seat belt does not pass
over objects that are hard or can
break easily.
• Make sure there is nothing in the
buckle. The seat belt may not be
fastened securely.
Seat belt warning
1GQA2083 1GQA2083
As a reminder to the driver (or front
passenger), the driver’s (or front
passenger’s) seat belt warning lights will
illuminate for approximately 6 seconds
each time you turn the ignition switch
ON regardless of belt fastening.
If the driver’s (or front passenger’s)
seat belt is not fastened when the
ignition switch is turned ON or if it is
disconnected after the ignition switch
is turned ON, the seat belt warning light
will illuminate until the belt is fastened.
If you continue not to fasten the seat
belt and you drive over 9 km/h, the
illuminated warning light will start to
blink until you drive under 6 km/h.
If you continue not to fasten the seat
belt and you drive over 20 km/h (12 mph)
the seat belt warning chime will sound
for approximately 100 seconds and the
corresponding warning light will blink.