Hyundai Bi3 Owner'S Manual Download

Page: 225 / 444

6-97

WARNING - About driving

• Do not operate the system while

driving. Driving while distracted may

result in a loss of vehicle control,

potentially leading to an accident,

severe personal injury, or death.

The driver’s primary responsibility

is the safe and legal operation of a

vehicle, and any handheld devices,

equipment, or vehicle systems which

divert the driver’s attention from this

responsibility should never be used

during operation of the vehicle.

• Avoid watching the screen while

driving. Driving while distracted

may lead to a traffic accident. Stop

your vehicle in a safe location before

using functions that require multiple

operations.

• Stop your vehicle first before using

your mobile phone. Using a mobile

phone while driving may lead to a

traffic accident. If necessary, use the

Bluetooth Handsfree feature to make

calls and keep the call as short as

possible.

• Keep the volume low enough to hear

external sounds. Driving without the

ability to hear external sounds may

lead to a traffic accident. Listening

to a loud volume for a long time may

cause hearing damage.

WARNING

- About handling the system

• Do not disassemble or modify the

system. Doing so may result in an

accident, fire, or electric shock.

• Do not allow liquids or foreign

substances to enter the system.

Liquids or foreign substances may

cause noxious fumes, a fire, or a

system malfunction.

• Stop using the system if it

malfunctions, such as no audio

output or display. If you continue

using the system when it is

malfunctioning, it may lead to a fire,

electric shock, or system failure.

• Do not touch the antenna during

thunder or lightning because such an

act may cause electric shock.

Information

- About operating the system

•

Use the system with the engine running.
Using the system for a long time when
the engine is stopped may discharge the
battery.

•

Do not install unapproved products.
Using unapproved products may cause
an error while using the system. System
errors caused by installing unapproved
products are not covered under the
warranty.

Summary of Contents for Bi3





























































































































































































































































































































































































































































Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands

Hyundai Bi3, Owner'S Manual

Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands