Hyundai Bi3 Owner'S Manual Download Page 111

Page: 111 / 444

5-21

Wiper mode

OCN7040039L

This indicator displays which wiper

speed is selected using the wiper

control.

Turn on FUSE SWITCH

This warning message is displayed if

the fuse switch located on the fuse box

under the steering wheel is OFF.
You should turn the fuse switch on.
For more details, refer to “Fuses”

Section in chapter 9.

Low pressure (if equipped)

OBI3040008

This warning message is displayed if the

tire pressure is low. The corresponding

tire on the vehicle will be illuminated.
For more details, refer to “Tire Pressure

Monitoring System (TPMS)” section in

chapter 8.

Heated Steering Wheel turned off

(if equipped)

This message illuminates if the heated

steering wheel will turn off automatically

approximately 30 minutes after the

heated steering wheel is turned on.
For more details, refer to “Heated

Steering Wheel” in chapter 5.

Low fuel

This warning message is displayed if the

fuel tank is almost out of fuel.
When this message is displayed, the low

fuel level warning light in the cluster will

come on.
It is recommended to look for the

nearest fueling station and refuel as

soon as possible.

Summary of Contents for Bi3





























































































































































































































































































































































































































































Search results

Summary of Contents for Bi3

Reviews:

Brands by name

Popular brands

Hyundai Bi3, Owner'S Manual

Search results

Summary of Contents for Bi3

Reviews:

Brands by name

Popular brands