Hyundai Bi3 Owner'S Manual Download

Page: 395 / 444

10-56

Maintenance

Tire replacement

OEN076053

Tread wear indicator

If the tire is worn evenly, a tread wear

indicator will appear as a solid band

across the tread. This shows there is

less than 1.6 mm (1/16 inch) of tread left

on the tire. Replace the tire when this

happens.
Do not wait for the band to appear

across the entire tread before replacing

the tire.

NOTICE

When replacing the tires, recheck and

tighten the wheel nuts after driving

about 1,000 km (620 miles). If the

steering wheel shakes or the vehicle

vibrates while driving, the tire is out of

balance. Align the tire balance. If the

problem is not solved, we recommend

that you contact an authorized

HYUNDAI dealer.

WARNING

Replacing tires
To reduce the chance or serious or fatal

injuries from an accident caused by tire

failure or loss of vehicle control:
• Replace tires that are worn, show

uneven wear, or are damaged.

Worn tires can cause loss of braking

effectiveness, steering control, and

traction.

• Do not drive your vehicle with too

little or too much pressure in your

tires. This can lead to uneven wear

and tire failure.

• When replacing tires, never mix

radial and bias-ply tires on the

same car. You must replace all tires

(including the spare) if moving from

radial to bias-ply tires.

• It is best to replace all four tires at the

same time. If that is not possible, or

necessary, then replace the two front

or two rear tires as a pair. Replacing

just one tire can seriously affect your

vehicle’s handling.

• Using tires and wheel other than the

recommended sizes could cause

unusual handling characteristics and

poor vehicle control, resulting in a

serious accident.

• Wheels that do not meet HYUNDAI’s

specifications may fit poorly and

result in damage to the vehicle or

unusual handling and poor vehicle

control.

• The works by comparing the speed of

the wheels. Tire size can affect wheel

speed. When replacing tires, all 4

tires must use the same size originally

supplied with the vehicle. Using tires

of a different size can cause the ABS

(Anti-lock Brake System) and ESC

(Electronic Stability Control) to work

irregularly. (if equipped)

Summary of Contents for Bi3





























































































































































































































































































































































































































































Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands

Hyundai Bi3, Owner'S Manual

Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands