Hyundai Bi3 Owner'S Manual Download Page 194

Page: 194 / 444

6-66

Convenient features

OBI3050103

Instrument panel vents

You can adjust the direction of air

delivered from these vents using the

vent control lever as shown.

Temperature control

OBI3050114

The temperature will increase by

pushing the switch to up.
The temperature will decrease by

pushing the switch to down.
The temperature will increase or

decrease by 0.5°C (1°F) for each

incremental location. When set to the

lowest temperature setting, the air

conditioning will operate continuously.

Temperature conversion

If the battery has been discharged or

disconnected, the temperature mode

display will reset to Centigrade.
To change the temperature unit from °C

to °F or °F to °C :
- Automatic climate control system
Press the AUTO button for 3 seconds

while pressing the OFF button.

- Instrument cluster
Go to User Settings

Units

Temperature Unit.

The temperature unit on both the cluster

LCD display and the climate control

screen will change.

Summary of Contents for Bi3





























































































































































































































































































































































































































































Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands

Hyundai Bi3, Owner'S Manual

Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands