Hyundai Bi3 Owner'S Manual Download Page 311

Page: 311 / 444

8-9

Rear top view (if equipped)

OBI3070009

When you touch the icon, the top

view is displayed on the screen and

shows the distance from the vehicle in

the back of your vehicle while parking.

System malfunction and

limitations

System malfunction

When Rear View Monitor is not working

properly, or the screen flickers, or the

camera image does not display normally,

we recommend that the system be

inspected by an authorized HYUNDAI

dealer.

Limitations of the system

When the vehicle is stopped for a long

time in winter or when the vehicle is

parked in an indoor parking lot, the

exhaust fumes may temporarily blur the

image.

WARNING

• The rear view camera does not cover

the complete area behind the vehicle.

The driver should always check the

rear area directly through the inside

and outside rearview mirror before

parking or backing up.

• The image shown on the screen may

differ from the actual distance of the

object. Make sure to directly check

the vehicle's surroundings for safety.

• Always keep the rear view camera

lens clean. If the lens is covered with

foreign material, it may adversely

affect camera performance and

Rear View Monitor may not operate

normally.

Summary of Contents for Bi3





























































































































































































































































































































































































































































Search results

Summary of Contents for Bi3

Reviews:

Brands by name

Popular brands

Hyundai Bi3, Owner'S Manual

Search results

Summary of Contents for Bi3

Reviews:

Brands by name

Popular brands