Hyundai Bi3 Owner'S Manual Download Page 441

Page: 441 / 444

10-102

Maintenance

4. Self Regeneration Mode

LCD Type

If the warning message “Self

Regeneration” is stored in inspection

message tap, it is operable in LCD

warning message page.

WARNING

• Make sure the vehicle parked on

safety zone (to avoid the flammables

like grass and traffic accident)

• Check remained fuel above 1/5 of

full level fuel gauge to prevent fuel

overheat

• Open the hood to prevent engine

room overheat

• Self regeneration should be done

only when DPF indicator illuminates

OSU2I089042

If the warning message “Diesel filter

regeneration required, See owner’s

manual.” appears on the LCD display,

Self Regeneration is required

To initiate Self Regeneration

1. Engage parking brake and shift lever

at P state.

2. Turn on the engine
3. Warm up the engine and check engine

temperature gauge at the middle

position

4. Turn on the air conditioner and set the

blower to the maximum.

5. Turn on the high beam.
6. Operate the rear defog function.
7. Hold the OK button on the LCD

warning message page.

OSU2I089039

8. Turn off and turn on the engine again.

Summary of Contents for Bi3





























































































































































































































































































































































































































































Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands

Hyundai Bi3, Owner'S Manual

Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands