Hyundai Bi3 Owner'S Manual Download

Page: 444 / 444

10-105

WARNING

If vehicle doesn’t enter regeneration

mode or if regeneration mode is

interrupted, stop the engine (Key Off),

wait for 20 seconds and retry the self

regeneration procedure.

WARNING

Self regeneration should be done

only when DPF indicator illuminates.

Frequent regeneration may cause

engine oil dilution and shortening of

Diesel Catalyst durability.

Service Check

If the DPF indicator change from

illuminates to blink or Engine Check

Lamp(MIL) illuminates with DPF

indicator in spite of the procedure,

please visit an authorized Hyundai dealer

and then check the Diesel Catalyst

and engine system including oil level

inspection.
Please note that the vehicle acceleration

is limited to protect engine system when

DPF indicator blinks or Engine Check

Lamp(MIL) illuminates.

Summary of Contents for Bi3





























































































































































































































































































































































































































































Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands

Hyundai Bi3, Owner'S Manual

Search results

Summary of Contents for Bi3

Reviews:

Related manuals for Bi3

Brands by name

Popular brands