Hyundai Bi3 Owner'S Manual Download Page 442

Page: 442 / 444

10-103

OSU2I089037

Not Operating Condition

Under below condition, Diesel

Catalyst regeneration process may be

interrupted. (Engine RPM drops to idle

state)
- Engine overheat or insufficient

warm-up

  - Shift lever change to D or R state
  - Acceleration pedal is pressed
  - Movement of Vehicle (Vehicle speed

over 0)

Service Check

If the DPF indicator change from

illuminates to blink or Engine Check

Lamp(MIL) illuminates with DPF

indicator in spite of the procedure,

please visit an authorized Hyundai dealer

and then check the Diesel Catalyst

and engine system including oil level

inspection.
Please note that the vehicle acceleration

is limited to protect engine system when

DPF indicator blinks or Engine Check

Lamp(MIL) illuminates.

OSU2I089040

Operationg Self Regeneration Mode

If the self regeneration mode starts, the

message “Filter regenerationg…” and the

remaining time appears.
It takes around 30~60 minutes.

OSU2I089041

Self Regeneration Mode Fail

The regeneration operation could be

canceled if the driver press the OK

button firmly while operating the self

regeneration process.

Summary of Contents for Bi3





























































































































































































































































































































































































































































Search results

Summary of Contents for Bi3

Reviews:

Brands by name

Popular brands

Hyundai Bi3, Owner'S Manual

Search results

Summary of Contents for Bi3

Reviews:

Brands by name

Popular brands