HP 8712C, User Manual, Page: 463 / 559

I
Reference
s
in menu. Sets the stop frequency of source. Maximum
frequency is 1.3 for HP and 3.0 for HP
in menu. Sets stopping point (in for a power sweep
measurement. in menu must be selected before
setting the start and stop power points.
See entry in this chapter for more information on the power
sweep function.
in update correction constants menu. Writes a copy of CC data from
To Disk
internal volatile RAM to a disk in the analyzer’s built in 3.5” disk drive. This
function is used to make a backup copy of CC data.
See the Service for more information.
Access Keys:
[
SYSTEM OPTIONS
)
in update correction constants menu. Writes a copy of CC data from
To
internal volatile RAM to EPROM. This function is used so that current CC
data is not lost when power to the analyzer is turned off.
See the Service Guide for more information.
Access Keys: (
SYSTEM OPTIONS
]
in SOURCE area of front panel. Displays menu to select automatic
sweep tune (fastest possible), manual sweep, alternate sweep, or power
sweep.
in user TTL menu. Sets the USER TTL IN/OUT port on the
rear panel to be pulled high during a sweep.
Access Keys:
(
SYSTEM OPTIONS
)
9 - 7 8