HP 8712C, User Manual, Page: 419 / 559

Reference
H
in more CRT adjustment menu. CRT timing adjustment for use with
Porch
external monitors. Also affects network analyzer’s internal CRT. Default
setting is 31.68
This setting is not affected by an instrument preset.
See “Using an External VGA Monitor” in Chapter 4 for more information.
Access Keys:
OPTIONS
]
Adjust
in the CRT adjustment menu. Changes the horizontal positioning of
the display on both the internal CRT and an external monitor. Accepts whole
number values from 1 to 100, with 1 representing as far left as possible and
with 100 representing as far right as possible. The default value set at the
factory (and obtained by pressing
is 73. This setting is
not affected by an instrument preset.
See “Using an External VGA Monitor” in Chapter 4 for more information on
using an external display.
Access Keys:
(
SYSTEM OPTIONS
_)
CRT
in file format menu. Select this key only if you are saving instrument
states that are to be used in older model (“A” or “B”) analyzers.
See “Saving and Recalling Measurement Results” in Chapter 4 for more
information.
Access Keys: (
SAVE RECALL
] Define Save File
in file format menu. Always select this key, unless you need your
saved file to be compatible with older model (“A” or analyzers.
See “Saving and Recalling Measurement Results” in Chapter 4 for more
information.
Access Keys:
RECALL
]
9-34