HP 8712C, User Manual, Page: 396 / 559

I
Reference
B
in marker search menu. Automatically calculates -3 (default) or
other user-specified bandwidth, center frequency, and Q of a filter.
See “Using Markers” in Chapter 4 for more information.
Access Keys:
in select copy port menu. Sets the transmission baud rate of
the analyzer for serial devices. Make sure the rate you set matches the
requirement of the output device (see its manual for details).
Access keys:
in system configuration menu. Sets the analyzer beeper volume from
off (0) to high (100). The default is 90.
Access keys:
OPTIONS
) System
to left of disk drive. An appropriate place to begin measuring any of
the four types of devices in the begin menu. Recommended for one channel
measurements.
See “Using the Key” in Chapter 3 for more information.
used to define a limit line.
See “Using Limit Lines in Chapter 4 for more information.
Access Keys: Add limit Add Max Line or
Add Min
used to define a limit line.
See “Using Limit Lines” in Chapter 4 for more information.
Access Keys: Add limit Add Max or
Add Mia Line
9-11