HP 8712C, User Manual, Page: 285 / 559

I
Automating Measurements
Configuring Your Test System
Stand-Alone Network
In this configuration, the measurement is controlled directly by the operator,
Analyzers
with very little automation. No computer or control is used,
however the fast recall feature may be used for quickly changing to different
instrument states. This configuration is well suited for simple go/no-go device
testing using the built-in limit testing features.
your system as a
stand-alone analyzer if you would like to:
Simplify test system configuration
l
Reduce capital expense
l
Allow for future expansion with minimal effort
l
Minimize the space required for a system
Figure shows a stand-alone network analyzer.
N E T W O R K A N A L Y Z E R
Figure Stand-Alone Network Analyzer
7 - 6