HP 8712C, User Manual, Page: 185 / 559

Using Instrument Functions
Saving and Recalling Measurement Results
When you save data to a the analyzer automatically selects a name
for you. Since these names may not be as descriptive as desirable, you may
change the name of the
after it has been saved, or you can save it to a file
name of your choice by using the function. See “Other File
Utilities” later in this chapter for information on how to change a name.
When saving a file using the Its-Save function, enter the Ele name
in one of the following ways:
l
Use an external keyboard connected to the analyzer’s rear panel DIN
KEYBOARD connector and type in the (For information on using
a keyboard, see “Using a Keyboard” later in this chapter.)
l
Use the front panel knob and key to point and select
each character of the new hlename. Then press .
N O T E
Refer to Chapter 12 at the end of this guide for information on the analyzer’s instrument state
memory allocation.
4-67