HP 8712C, User Manual, Page: 408 / 559

I
Reference
in menu. Selects the resolution of the displayed frequency
resolution as MHz, or Hz. For example, a frequency of Hz can
be displayed as: 1 MHz (note rounding down), 1.235 MHz (note rounding up),
or 1.234 567 MHz. Default is
in CONFIGURE area of front panel. Displays menu with selections
concerning type of data to be displayed, split or full screen, title and limit
lines.
(Option 100 available under the key and the add
max point and add min point menus. Used to perform fault location
measurements. See your
Option 100 User’s Guide Supplement
for
information.
in spur avoid options menu. When selected, shifts spurs which may
be visible in low level measurements.
See “Reducing Trace Noise” in Chapter 5 for more information.
C A U T I O N
The measurement calibration must be performed with the same spur avoid
option used in the measurement or your results may be invalid.
Access Keys: Options
in the cal check menu. Initiates a calibration check.
See Chapter 6 for more information on using cal check.
Access Keys: Check
in select copy port menu. A hardware handshake for some serial
devices. Toggles with .
Access Keys: Port
9-23