manualshive.com logo in svg

Honeywell AUTOMATIC CONTROL, Engineering Manual

Honeywell AUTOMATIC CONTROL Engineering Manual is an essential resource for professionals seeking in-depth knowledge on control systems. This comprehensive manual covers various aspects of automatic control, providing valuable insights and practical guidance. Download your free copy exclusively from manualshive.com, the go-to hub for user manuals.

Share
Download
background image

MICROPROCESSOR-BASED/DDC FUNDAMENTALS

142

ENGINEERING MANUAL OF AUTOMATIC CONTROL

Distributed Power Demand

The distributed power demand program (Fig. 12) is only applicable

to microprocessor controllers with intercommunications capability.
The demand program is resident in a single controller which monitors
the electrical demand and transmits the required load shed or restore
messages to other controllers on the communications bus or within
the network. Each individual controller has prioritized load shed tables
so that when a message to shed a specific number of kilowatts is
received it can respond by shedding its share of the load. The basic
demand program normally utilizes a sliding window demand
algorithm and has provision for sequencing so that the same loads
are not always shed first when a peak occurs.

It should be noted that there is interaction between the power
demand program, duty cycle program, time schedule programs,
and optimum start and stop programs. Therefore, a priority
structure program is necessary to prevent control contentions.

BUILDING MANAGEMENT SOFTWARE

Microprocessor-based controllers are used extensively as

data gathering panels (DGP) for building management
systems. Since a microprocessor-based controller is already
in place to provide DDC, IAQ, and EMS functions, many
sensors and data files can be shared with building management
system (BMS) functions. The distribution of many BMS
functions into controllers throughout the premises increases
the overall system reliability. The following BMS software is
normally included in the controller.

Alarm lockout: Permits designated alarm points to be locked

out from reporting process depending on the status
of another point, e.g., discharge temperature alarm
can be locked out when fan is off and during initial
startup periods.

Alarm monitoring: Scans all analog and digital points and

tests for alarm status. Sets of high and low limits for
analog inputs are stored in the controller.

Communications module:  Controls transmissions between

controllers and between controllers and a central
computer based on an established bus protocol.

Global points: Allows designated points to share their data

with other bus connected devices.

Run time: Accumulates equipment on or off time and trans-

mits totals periodically to the central system. On-off
cycle counting can also be accumulated as a main-
tenance indicator. Alarm annunciation occurs if run
time or cycle count limits are exceeded.

Time and event programs: Initiates a predetermined series

of control actions based on an alarm condition, a point
status change, time of day, or elapsed time. Points
acted upon can be resident in any controller.

POWER (KW OR MW) 

DEMAND

INTERVAL

DEMAND

INTERVAL

DEMAND

INTERVAL

DEMAND

INTERVAL

1

2

3

4

DEMAND

LIMIT 

AVERAGE

DEMAND

POWER

CURVE

AVERAGE

DEMAND

TIME

C2429

Fig. 12. Typical Power Curve Over Four

Successive Demand Intervals.

CONTROLLER PROGRAMMING

GENERAL

The term programming as it pertains to microprocessor-

based controllers relates primarily to setting up the controller
for the given application. Zone-level controllers require
initialization, selection of control algorithms and parameters,
definition of control sequences, and establishing reference data
bases. For zone-level controllers, the programming effort can
be as simple as selecting the applicable control sequence from
a library of programs resident in a configurable controller. For
highly customized applications, usually encountered at the
system controller level, a problem oriented language or a subset
of a high-level language can be used to define control loops
and sequences.

The means of entering a program can vary from a keypad

and readouts on the controller to an operator terminal in a large
centrally based computer configuration. Sophistication of the
entry device is directly related to how well defined and fixed
the control application is compared to the degree of
customization or end-user modifications required. If
considerable customization or modification is required, data
entry could require a centrally based computer or a portable
PC.

Summary of Contents for AUTOMATIC CONTROL







































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AUTOMATIC CONTROL

Febco Master Series Installation Instructions Manual preview
Master Series
Brand: Febco Pages: 12
GameSir G4s User Manual preview
G4s
Brand: GameSir Pages: 8
Game ready 550450 User Manual preview
550450
Brand: Game ready Pages: 21
VAMP 259 Operation And Configuration Instructions preview
259
Brand: VAMP Pages: 304
Tactical TTC Instruction Manual preview
TTC
Brand: Tactical Pages: 8
National Instruments 9853 Getting Started Manual preview
9853
Brand: National Instruments Pages: 29
National Instruments IC-3173 Getting Started Manual preview
IC-3173
Brand: National Instruments Pages: 14
National Instruments SCXI-1104 Manual preview
SCXI-1104
Brand: National Instruments Pages: 11
Nauticam 25624 Instruction Manual preview
25624
Brand: Nauticam Pages: 2
National Instruments NI 9265 Getting Started Manual preview
NI 9265
Brand: National Instruments Pages: 18
National Instruments PXIe-4310 Calibration Procedure preview
PXIe-4310
Brand: National Instruments Pages: 10
National Instruments cRIO-9032 Getting Started Manual preview
cRIO-9032
Brand: National Instruments Pages: 20
NAPCO GEMINI C Series Installation Instructions Manual preview
GEMINI C Series
Brand: NAPCO Pages: 24
UniPOS VIT 01 Instruction Manual preview
VIT 01
Brand: UniPOS Pages: 51
Unipulse F159 Operation Manual preview
F159
Brand: Unipulse Pages: 126
YachtSafe W010 Manual preview
W010
Brand: YachtSafe Pages: 3
SOMFY Situo 1 RTS Installation And Operating Manual preview
Situo 1 RTS
Brand: SOMFY Pages: 112
Bettis TEC2 Quick Start Manual preview
TEC2
Brand: Bettis Pages: 18

Brands by name

Popular brands

Load more brands