manualshive.com logo in svg

Honeywell AUTOMATIC CONTROL, Engineering Manual

Share
Download
Honeywell AUTOMATIC CONTROL Engineering Manual Download Page 201

ENGINEERING MANUAL OF AUTOMATIC CONTROL

BUILDING MANAGEMENT SYSTEM FUNDAMENTALS

191

as word processors, spread sheets, and data bases to operate
concurrently with the BMS. In such cases, a BMS alarm
overwrites the monitor screen until acknowledged and canceled.

Other standard programs are often embedded in BMS

software. A spread sheet may be an integral part of the trend
report utility. This allows the operator not only to view the output
of the requested report, but to review and edit it in the
spreadsheet format. The spread sheet also can be called up as a
stand-alone utility. System graphics are usually based upon
standard graphics software.

Communications Software

Software at the operations level communicates with all

system- and zone-level processors in a peer-to-peer fashion.
Communications functions include:

— Receiving alarm and return-to-normal reports (including

remote device communications failures).

— Receiving trend status’ and values.
— Passing global data and alarm reports to other devices

on the ETHERNET LAN.

— Transmitting requests for display data.
— Transmitting requests for report data.
— Uploading and downloading of controller software.
— Transmitting digital and analog commands.
— Reading/writing controller database points including

limits, setpoints, times, and parameters.

— Coordinating global LAN server database including

graphic configurations, operator assignments and
segregation, history files, and schedule files.

— Entering or editing system-level processor programs.
— Configuring or editing zone-level processor programs.

Server

When using multiple operation/management-level

processors, one is defined as the database server, where all
current database resides. Any processor may initiate a system
change (graphic or text modification, operator assignment,
schedule, etc.), but all changes are made to the server database.
The server is a software function and may be a dedicated PC
or any other LAN processor.

All LAN processors operate from the server, which
periodically updates the databases of the other LAN
processors. When the server (LAN) is down, the processors
operate from their own database.

Security

System security software prevents unauthorized system

access and can limit authorized personnel to geographic areas
as well as function (acknowledge alarms, issue commands,
modify database, etc.). Top level operators assign security
passwords and enter security parameters for other operators.

If no keyboard or mouse activity occurs for a predetermined

time period, the operator is automatically signed-off. All
operator sign-on and sign-off activity is archived.

Alarm Processing

Upon receiving an alarm from a  controller, operations-level

processors initiate alarm processing as follows:

— Determine if the alarm point is assigned to the receiving

processor.

— Rebroadcast the alarm to the server for archival and to

other LAN processors.

— If Assigned:

• Present an immediate alarm message display.

– Output alarm message to alarm printer.
– Alarm point text descriptor.
– Time/Date.
– Text action message.
– Present acknowledge button.
– Initiate audible.

• No audible.
• For timed duration or continuously.
• Fast, medium or slow beep rate.

• (Option) Automation Graphic Display.
• Present button for operator graphic display request.

— Present alarm status on graphics (point red if in alarm,

blinking if unacknowledged).

The alarm archive may be queried at any time to analyze

historical alarm activity.

Reports

BMS Software includes many system reports for display and

printout in addition to alarm reports.

Database reports document system software such as point

processing parameters, system text, controller configuration, etc.

The trend report utility allows for archival of data point

status and values for subsequent review. Archival may be based
upon a time interval or a change in status or value. Trend data
may be reviewed as archived or may be sorted and reduced,
such as “Print the maximum daily temperature from 3-16-96 to
5-16-96”. Trend data may be presented in columnar format or
as a curve plot with up to eight points per display/printout.
Trend sample requirements are usually set-up in the controller
and automatically reported to the BMS thereafter.

Other standard reports may be:

• All point summary.
• Alarm summary.
• Disabled Points Log.
• Single System Summary (single AHU or single chiller).
• Controller Status Summary.

Summary of Contents for AUTOMATIC CONTROL







































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands