manualshive.com logo in svg

Honeywell AUTOMATIC CONTROL, Engineering Manual

Honeywell AUTOMATIC CONTROL Engineering Manual is an essential resource for professionals seeking in-depth knowledge on control systems. This comprehensive manual covers various aspects of automatic control, providing valuable insights and practical guidance. Download your free copy exclusively from manualshive.com, the go-to hub for user manuals.

Share
Download
background image

ENGINEERING MANUAL OF AUTOMATIC CONTROL

BUILDING MANAGEMENT SYSTEM FUNDAMENTALS

190

A modem is required for signal compatibility with the phone

line. The BMS dial-up phone line interface provides
compatibility with transmission rate and protocol of the phone
line and reduces the leased line operation to costs associated
only with call frequency and connect time. As an example of

reduced costs, historical storage of alarm activity can be included
in the remote phone line interface so that the data is
transmitted during periodic dialup by the central system.
Critical alarms can be programmed at the remote to dial the
central system immediately.

SYSTEM FUNCTIONS

GENERAL

Each BMCS level provides some degree of stand-alone

capability and collects and preprocesses data for other
processing levels. The following discussion starts with the
functions provided by the lowest level of processing in the
configuration, or hierarchy, and progresses to the highest level.

ZONE-LEVEL CONTROLLER FUNCTIONS

The primary function of the zone-level controller is to

provide direct digital control of unitary equipment. To support
the resident DDC programs, the zone-level controller interfaces
with sensors and actuators and performs the functions of point
processing as well as execution of the DDC programs.

SYSTEM-LEVEL CONTROLLER
FUNCTIONS

System-level controllers provide increased processing

capability, higher I/O capacity, and more universal application
flexibility than zone-level controllers and have greater stand-
alone capability. System-level controllers handle multiple
DDC loops and the complex control sequences associated with
built-up air handling units and other HVAC equipment. Other
types of system-level controllers monitor multiple zones of
fire alarm, security points, and/or lighting control. They can
also provide emergency evacuation control through speakers
and control personnel movement with access control and card
readers. For a detailed description of system-level controllers,
refer to Microprocessor-Based/DDC Fundamentals section.

Processed point data at the system controller level is used

directly by the resident DDC, EMS, and time/event programs.
The data is also available for readout at local control panels,
portable terminals, and can be communicated up to the
operations-level processor and to other system-level
controllers. In addition, all parameters and output values
associated with DDC and other resident programs are
accessible for local and operations-level readout and
adjustment. Data point values may be shared between zone-
level controllers, between system-level controllers, and
between zone- and system-level controllers.

OPERATIONS-LEVEL FUNCTIONS

GENERAL

The operations level is the third tier of the BMCS

configur ation. Building or facility operations and
management personnel interact on a day-to-day basis through
this level. The hardware and software for this tier is dedicated
to interfacing with operating personnel rather that with
mechanical systems, as the controllers do in the lower tiers
of the BMCS configuration.

HARDWARE

The operations-level processor supplies the processing

capacity and memory required for all communications and
operator interface software as well as the peripheral capacity
for dedicated alarm and report printers and work stations It is
usually a PC consisting of:

— Full keyboard, with mouse or other entry device.
— High resolution color monitor.
— RAM or working memory.
— Hard disk memory.
— Diskette drive.
— Multiple peripheral ports.
— Communications interface boards.
— At least one printer.

SOFTWARE

While hardware enables operator interaction and the

display  and printout of data, the software determines how
the interaction takes place, the data is displayed, and the printer
output is formatted.

Standard Software

Most BMSs run under Microsoft Windows™ and use

standard mouse conventions, such as drop-down menus, dialog
boxes, radio buttons, and up-down arrows. Many systems allow
the use of other standard Windows compatible programs such

Summary of Contents for AUTOMATIC CONTROL







































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AUTOMATIC CONTROL

ABC Design Tandem Instructions For Use Manual preview
Tandem
Brand: ABC Design Pages: 38
easydriver Pro Installation And Instruction Manual preview
Pro
Brand: easydriver Pages: 26
Calsense CS3000 Quick Start Manual preview
CS3000
Brand: Calsense Pages: 10
ABC Design Rodeo Instructions Manual preview
Rodeo
Brand: ABC Design Pages: 10
ABC Design Astro Instruction Manual preview
Astro
Brand: ABC Design Pages: 10
Samson 2479 Mounting And Operating Instructions preview
2479
Brand: Samson Pages: 78
Madas M16/RM N.C. DN 65 EEX Technical Manual preview
M16/RM N.C. DN 65 EEX
Brand: Madas Pages: 44
X-lander X-cite Manual preview
X-cite
Brand: X-lander Pages: 72
X Rocker 2.1 Wireless Manual preview
2.1 Wireless
Brand: X Rocker Pages: 38
Xantrex Trace C35 Installation And Operation Manual preview
Trace C35
Brand: Xantrex Pages: 56
Xantrex TrueCharge 2 Owner'S Manual preview
TrueCharge 2
Brand: Xantrex Pages: 2
Xantrex Freedom Sequence Owner'S Manual preview
Freedom Sequence
Brand: Xantrex Pages: 58
Xantrex Freedom e-GEN Checklist preview
Freedom e-GEN
Brand: Xantrex Pages: 4
Xantrex AGS Owner'S Manual preview
AGS
Brand: Xantrex Pages: 20
Partizan PAB-FC2 Quick Start Manual preview
PAB-FC2
Brand: Partizan Pages: 7
Gardigo 62318 Instruction Manual preview
62318
Brand: Gardigo Pages: 6
VAT 244 Series Installation, Operating, & Maintenance Instructions preview
244 Series
Brand: VAT Pages: 14
GADGETMONSTER GDM-1026 Manual preview
GDM-1026
Brand: GADGETMONSTER Pages: 30

Brands by name

Popular brands

Load more brands