134
None. (The parameter is not set as a detection condition.)
2.
Range of values:
None
<igmp type>
Specifies the IGMP type.
This parameter option is available only when the protocol is IGMP.
1.
Default value when this parameter is omitted:
None. (The parameter is not set as a detection condition.)
2.
Range of values:
Specify 0 to 255 (in decimal).
fragments
Specifies the second and subsequent fragmented packets.
1.
Default value when this parameter is omitted:
None. (The parameter is not set as a detection condition.)
2.
Range of values:
None
Action parameters
action
To set or change an action parameter, you must set the
action
parameter keyword
at the beginning of the action parameter.
1.
Default value when this parameter is omitted:
None. (This
action
parameter keyword cannot be omitted if an action is set.)
2.
Range of values:
None
log
The packets discarded by the specified access list are included in access list
logging.
1.
Default value when this parameter is omitted:
None. (Access list logging is not used.)
2.
Range of values:
None
Default behavior
None
Impact on communication
If an entry is added or changed when an access list is applied to an interface, packets
received at the interface might be discarded temporarily until the entry is applied to the
interface.
When the change is applied
The change is applied immediately after setting values are changed.
Summary of Contents for GX1000-SMC013X
