Hitachi GX1000-SMC013X, Instruction Manual

Page: 416 / 452

416
accelerate-tcp-option
Description
Sets the option number for WAN acceleration processing, which is set to an option in a TCP
packet.
Input mode
SP configuration mode
Syntax
accelerate-tcp-option { <
option number
> | default }
Parameters
{ <
option number
> | default }
Specifies the option number for WAN acceleration processing.
1. Default value
This parameter cannot be omitted.
2. Specifiable value range
< option number >
6, 7, 9-255
default
Discards what has been set and resets to the default value (100).
Notes
This command is set when a packet with the option number 100 is received from the
LAN side.
What has been set by executing this command is immediately enabled.
Execute this command when there is no traffic.
When this command is set, a confirmation message below appears. If you want to
set the command, enter
y
. If you want to stop the setting, enter
n
.
WARNING: do you really want to overwrite the accelerate option number
(y/n)? [n]: