Hitachi GX1000-SMC013X, Instruction Manual

Page: 397 / 452

397
rule
Description
Specifies conditions for the sessions subject to WAN acceleration processing and the
sessions not subject to WAN acceleration processing
.
Input mode
SP configuration mode
Syntax
rule [<
list number
>] [vlan <
VLAN-ID
>]
from {<
IP address on the LAN side
>/<
Subnet length
> | any}
to {<
IP address on the WAN side
>/<
Subnet length
> | any}
[port <
TCP port number
> ]
do { accelerate [compress] [bandwidth-grp <
bandwidth-grp number
>]
[dscp <
dscp value
>] | passthrough }
Parameters
< list number >
Specifies the order in which conditions are compared. Conditions are compared in
ascending order.
1. Default value
Sets the unused smallest number by searching the corresponding command already
set.
2. Specifiable value range
1-1000
< VLAN-ID >
Specifies a VLAN ID as a condition.
1. Default value
Meets a condition for a packet without a tag.
2. Specifiable value range
1-4095
{<
IP address on the LAN side
>/<
Subnet length
> | any}
Specifies an IPv4 address and subnet length of the LAN side as conditions.
1. Default value
This parameter cannot be omitted.
2. Specifiable value range
An IP address on the LAN side
0.0.0.0-255.255.255.255
Subnet length
0-32
any
Specifies all IPv4 addresses.