Hitachi GX1000-SMC013X, Instruction Manual

Page: 417 / 452

417
log-threshold
Description
When specified conditions are satisfied, sets threshold values for log output.
Input mode
SP configuration mode
Syntax
log-threshold { lan | wan } { rtt_min { <
minimum RTT value
> | default }}
log-threshold { lan | wan } { rtt_max { <
maximum RTT value
> | default }}
log-threshold { lan | wan } { loss { <
loss rate threshold value
> | default }}
Parameters
{ lan | wan }
Instructs settings to either the LAN side or the WAN side.
1. Default value
This parameter cannot be omitted.
2. Specifiable value range
lan
Instructs settings for the LAN side.
wan
Instructs settings for the WAN side.
{ rtt_min { <
minimum RTT value
> | default }
In cases where RTT < <minimum RTT value> , a log is output.
When 0 is specified, a log is not output.
1. Default value
This parameter cannot be omitted.
2. Specifiable value range
<minimum RTT value>
0-500 (milliseconds)
default
Discards what has been set and resets to the following default values.
When
lan
is specified: 0 (milliseconds)
When
wan
is specified: 3 (milliseconds)
{ rtt_max { <
minimum RTT value
> | default }}
In cases where RTT > < maximum RTT value >, a log is output.
When 0 is specified, a log is not output.
1. Default value
This parameter cannot be omitted.