Hitachi GX1000-SMC013X, Instruction Manual

Page: 46 / 452

46
2.2 Installation conditions
The general installation requirements for the Device are described below. The installation
environment must meet these conditions.
Table 2-1 Device installation conditions
Specification Item
Hitachi WAN Accelerator
Dimensions (Width
#1
x Depth
#2
x Height) 443 x 545 x 110 mm
Weight (with maximum number installed) 25 kg
Rating Single phase 100 to 120 V AC
Single phase 200 to 240 V AC Input voltage
Variation range 90 to 132 V AC
180 to 264 V AC
Frequency
50/60
±
3 Hz
Maximum input current 16 A @ 100 V AC,
8 A @ 200 V AC
Maximum power consumption 900 W
Maximum heat emission 5,400 kJ/h
Intake temperature 25ºC 55 dB or less Noise
#4
Intake temperature 40ºC 60 dB or less
Vibration 2.45 m/s
2
or less
Dust
#5
0.15 mg/m
3
or less
Operating 0ºC to 40ºC (23ºC to 28ºC recommended)
Not operating -10ºC to 43ºC
Temperature
During storage and transportation -25ºC to 65ºC
Operating 10% to 85% (45% to 55% is recommended)
Not operating 8% to 85%
Humidity
#6
During storage and transportation 5% to 85%
#1: Dimensions of the rack fixture are not included.
#2: Dimensions for the handles of the Device, fan unit, and power supply unit are included.
#4: The value is measured at 1 m from the side of the Device. The number of rotations of
the fan varies according to the intake temperature. Accordingly, the noise values change.
#5: According to JIS Z 8813 Measuring Methods for Suspended Particulate Matter
Concentration in Air - General Requirements.
#6: No condensation