Hitachi GX1000-SMC013X, Instruction Manual

Page: 152 / 452

152
remark
Specifies supplementary information for the access list. Access lists are available for IPv4
address filtering, IPv4 packet filtering, IPv6 filtering, MAC filtering, and Advance filtering.
Input format
To set or change information:
remark
<remark>
To delete information:
no remark
Input mode
(config-ext-nacl)
(config-std-nacl)
(config-ipv6-acl)
(config-ext-macl)
(config-adv-acl)
Parameters
<remark>
Sets supplementary information according to input mode.
One line can be set for each access list. Entering new information overwrites the
existing information.
1. Default value when this parameter is omitted:
The initial value is null.
2. Range of values:
Enclose a character string with 64 or fewer characters in double quotation
marks (
"
). Specifiable characters are alphanumeric characters and special
characters. To enter a character string that does not include any special
characters such as a space, you do not need to enclose the character string in
double quotation marks ("). For details, see
Any character string in 6.3
Specifiable values for parameters.
Default behavior
None
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
None
Related commands
advance access-list