Hitachi GX1000-SMC013X, Instruction Manual

Page: 368 / 452

368
25014714
25014715
25014716
NOTICE SP
Firmware to
dump.[
<cause>
]
21
Dump collection failed.
[Explanation of the message text]
None.
[Action]
1. Use the
show SPfile
command to check the files stored in
the SP dump file storage area, and then use the
erase SPfile
command to delete unnecessary dump files and core dump
files.
This command is output if
dump files could not be
output for either of the
following reason when the
dump nif
command is
executed from the BCU or
when the
dump nif
command is executed from
the BCU due to an error in
the SP.
[Design memo]
Error cause:
An attempt to output dump
information to a file in the SP
failed (due to insufficient free
capacity or a permissions
error).
An attempt to write dump
information to the PCI
register failed.
01014113 INFO SP
Health check error on
CPU. Core No.
<core no>
22
A health check error occurred in the CPU core.[Explanation of
the message text]
<core no> : CPU core number
[Action]
Perform the following:
1. Collect error information according to the method for
collecting error information of the corresponding SP when the
error occurred, and then send it to maintenance personnel.
2. Maintenance personnel sends the collected information to the
support division.
3. Use
block SP
to switch the system to an SP In which the
message has not been generated.
4. Execute the
close nif
and
free nif
commands of the BCU
to restart the SP.
This message is output
when any of CPU cores
assigned to packet transfer
changes to abnormal state.