Hitachi GX1000-SMC013X, Instruction Manual

Page: 271 / 452

271
bind
Description
This command connects to an Ethernet port (physical port) or Ethernet Bridge port (logical
port).
Execute this command in the
bnet
level of configuration definition mode.
Syntax
To set information:
bind PORT {vlan other|no-tag|
TAG
}|raw[
COMMENT
]
To delete information:
delete bind PORT
delete bind PORT {vlan other|no-tag|
TAG
}|raw
delete bind all
Parameters
PORT
Specifies an Ethernet port or Ethernet bridge port.
1. Default value when this parameter is omitted:
None (this parameter cannot be omitted).
2. Range of values:
Name of the Ethernet or bridge port to bind.
vlan
Specifies a VLAN as the connection target.
1. Default value when this parameter is omitted:
None (this parameter cannot be omitted).
2. Range of values:
VLAN
other
Handles the packets with a VLAN tag value that is not set in the configuration.
1. Default value when this parameter is omitted:
None (this parameter cannot be omitted).
2. Range of values:
other
no-tag
Handles the VLAN packets without a tag and the packets with a VLAN tag value that
is not set in the configuration when the
other
parameter is not specified for the bnet.
1. Default value when this parameter is omitted:
None (this parameter cannot be omitted).
2. Range of values:
no-tag